Audio
Specification |
| Peak
acoustic level (@ 2ft) |
100dB SPL |
| Hum & noise |
More than 80dB below full output |
| Speakers |
2 mid/treble and 1 bass |
| Analogue
input impedance |
25 kΩ differential |
| Digital
input impedance |
110Ω differential (XLR) |
| or 75Ω unbalanced (BNC) |
| Level
meters |
4 x high resolution tri-colour
LED bar graphs |
| Meter
scales & ballistics |
User selected AES, DIN, BBC, VU,
Extended VU, Nordic |
| Alarms |
Audio loss, audio over-level, sustained
anti-phase |
Video
Option Specification |
| Video
Input |
SDI, SMPTE, 259M PAL or NTSC |
| Composite
Output |
Composite PAL or NTSC 1V p-p |
General |
| Power
requirements |
90-260 VAC 50/60 Hz |
| Power
consumption |
60W Max |
| Dimensions |
482w x 44.4h x 280d |
| Weight |
4kg |
|
|
|
 |
Rear
Panel Description |
| Power |
IEC connector 90-260VAC |
| Alarms |
Audio alarm TTL outputs and an alarm reset
input.
9 way female D type connector |
| RS232 |
Full alarm status information & control |
| Colour bar generator & front
panel selection control is available via this port |
| 9 way female D type connector |
| SDI input |
75Ω BNC connector |
| Video out |
Composite video output derived
from the SDI input |
| AES
in A & B |
Two pairs of AES digital audio
inputs |
| BNC for AES3 or XLR |
| Analogue
in 1-4 |
4 balanced analogue audio inputs |
| Female XLR connectors |
| Analogue
monitor out L/R |
2 balanced analogue audio outputs.
These reflect the audio currently selected for the speakers. |
| Male XLR connectors |
|
|
|
|
|
